DHCP poisoning
Last updated
Was this helpful?
Last updated
Was this helpful?
When a workstation reboots or plugs into a network, a broadcast DHCP request is emitted. It's goal is to ask for network settings like an IPv4 address.
Windows uses several custom DHCP options such as NetBIOS, WINS, WPAD settings. When a workstation sends a DHCP request to get its networking settings, these additional settings can be included in the DHCP answer to facilitate straightforward connectivity and name resolution. ()
provides Windows machines with a WPAD configuration. An attacker able to answer broadcast DHCP queries faster than the legit DHCP server can inject any network setting on the requesting client.
(Python) can be used to operate DHCP poisoning in the following manner
race against the legit DHCP server to answer DHCP REQUEST messages
sent a DHCP ACK response with a rogue WPAD server address in option 252 in the network parameters, with a short lease (10 seconds). Responder can also be used to attempt at injecting a DNS server instead.
wait the lease to expire so that the poisoned client asks for a new lease
let the client obtain a legitimate lease from the real DHCP server, allowing the client to obtain the right network settings and have connectivity
the injected WPAD server address will stay until the client reboots. If the injected field was a DNS server, it will be overwritten with the new legit DHCP lease.
with the injected WPAD server address, the Windows client will try to obtain the wpad.dat file on the rogue WPAD. Responder will then require the client to authenticate.
The attack can be started with the -d/--DHCP (WPAD injection) argument. By default, a rogue WPAD server will be injected in the configuration. If the additional-D/--DHCP-DNS argument is set, a rogue DNS server address will be injected in the configuration instead of a WPAD.
Additional arguments and options should be used when doing DHCP poisoning with the -d/--DHCP argument. Those options can also be used along -D/--DHCP-DNS since the WPAD DNS entry will be one of the first queries by the poisoned machine.
The -w/--wpad option to start the WPAD rogue server so that fake wpad.dat file can be served to requesting clients (i.e. )
The -P/--ProxyAuth option to force the Windows client to authenticate after the wpad.dat is accessed and when the client starts using the proxy
forced and with Responder with the command line above (with --wredir and --ProxyAuth)
or forced and with (by using the --http-port 3128 argument
